0 products
No products found
Try adjusting the filters or selecting another subcategory.
Get Multiple Factory Quotes for Your Parts in 24 Hours
Connect with 800,000+ listed factories in Asia. Receive multiple quotes for your parts and manage production with speed and confidence.
Stepper Motors with Lead Screw in NEMA 17 and 23 Frames
The Sourcing Challenge with Custom Lead Screw Configurations
Your prototype medical device needs 15 leadscrew motor units with ±0.02 mm pitch accuracy, but the factory you contacted last week quotes a 200-piece minimum order quantity and still hasn't confirmed whether their stainless steel lead screws include material traceability certificates. Where a separate screw and nut are preferred over an integrated assembly, standalone trapezoidal lead screws allow independent selection of pitch, lead, and thread starts. Precision machining tolerances you assumed were standard turn out to cause 30% scrap rates at facilities without proper grinding equipment, and quoted lead times of four weeks slip to ten without explanation.
These problems stem from poor supplier selection. Every verified factory here has passed qualification checks for business licenses, equipment confirmation, and baseline certifications. Factory profiles display company size (50-500 employees), years in operation, quality control staff count, and product categories with price ranges ($8-$85 per unit depending on configuration).
Verified Chinese factories producing NEMA 17 stepper motor screw assemblies, leadscrew motors for linear motion applications, and custom screw stepper motor configurations with integrated stepper motor with ball screw options have production capacity of 5,000-50,000 units per month. Submit an RFQ with CAD files and technical requirements to receive multiple comparable quotes within 24 hours from capability-matched factories.
When requesting custom configurations or side-by-side comparisons, specify lead screw pitch accuracy requirements (±0.02 mm), surface finish standards (Ra ≤0.8 µm), backlash tolerances (0.05-0.15 mm typical), motor torque specifications, stepper motor threaded shaft material requirements, and certifications such as ISO 13485 for medical devices or RoHS compliance.
Pricing, MOQ, and IP Protection
No middleman margin applies - factory-direct pricing runs 20-35% below distributor rates with no platform fee for buyers. Factory MOQs on stepper motors with lead screw assemblies vary by configuration, though the platform sets none for RFQ submissions. Three NDA options are available before you share drawings: open access for non-sensitive projects, the platform's standard digital NDA, or your own custom agreement that suppliers must sign before accessing files. Production tracking and technical clarifications go through your dedicated English-speaking account manager at no added cost.
Other related parts categories: Ball Screws, Ball Screw Support Units, Ball Splines, Trapezoidal Lead Screws
Frequently Asked Questions
What backlash tolerance should I expect from lead screw stepper motors in precision positioning applications?
Typical backlash on integrated lead screw stepper motor assemblies runs 0.05-0.15 mm depending on nut preload and screw pitch. If your application needs tighter positioning, ask about preloaded anti-backlash nut options and request the measured backlash figure from a sample unit rather than the nominal spec, since wear-in during the first production runs can shift the actual figure.
Is Haizol a Reliable Way to Source Lead Screw Stepper Motors From China?
Haizol has run as a China-specialist sourcing platform for more than 10 years and holds a 4.8/5 Trustpilot rating from verified buyers, a signal of consistency across many transactions, not just one good review. Factories are verified generally before appearing in the directory, and you deal with the manufacturer directly on price, so nothing is added on top by Haizol. For lead screw stepper motors, raise backlash tolerance and pitch accuracy with the factory once you've shortlisted a few candidates. A free account manager is available if you want several factories quoting at the same time.
What should I include in my RFQ for custom NEMA 17 or NEMA 23 lead screw stepper motors?
Specify frame size (NEMA 17 or 23), lead screw pitch accuracy (±0.02 mm is a common benchmark), surface finish requirement (Ra ≤0.8 µm is typical for smooth linear travel), backlash tolerance, holding torque, shaft material, and target quantity. Factories price and lead-time these assemblies faster when the pitch accuracy and surface finish are stated upfront rather than left as "standard."
What certifications should I request beyond ISO 9001 for lead screw stepper motors going into medical devices?
Request ISO 13485 certification specifically, since medical device components require quality system documentation beyond general ISO 9001 baseline compliance. Also confirm RoHS compliance if the assembly includes any electronic or plated components, as most medical device programs require that documentation before design freeze.
How do I verify material traceability certificates for stainless steel lead screws before production?
Request the mill certificate showing the specific steel grade, heat number, and mechanical properties for the lead screw stock used in your order, not a generic material spec sheet. This is worth confirming before committing to a production run, since substituting a lower-grade steel is one of the more common ways factories cut cost without flagging the change.