High Load 524167400 Forklift Mast Roller Bearing Chrome Steel OD 113.5 X ID 55 X W 21/34 mm for Restaurant Truck Forklift

Forklift Mast Roller Bearing lubrication
Forklift Mast Roller Bearing lubrication, first open the cover and watch to check the release bearing wear, if they are recognized bearing no damage or wear is not overrun, remove the clutch pedal adjustment mandrel release bearing and its seat back to the last position,butter filling to the bearing hole with a needle nose grease gun until the bearing oil spill, then slightly turn the bearing oiling again, repeat the above work, a little butter until around the bearing has an overflow, and then the bearing rotation observed oilIf you feel the the bearing rotation resistance,that bearings have been filled with butter. Then clear separation of a small amount of butter, and re-adjust the separation bearing position throughout the bearing seat overflow

Forklift Mast Roller Bearing Precautions
1, To keep the forklift bearing its surroundings clean
Even if the the invisible smile dust into the forklift bearings will increase bearing wear, vibration and noise.

2, Using the installation to be carefully Not allow powerful punch forklift bearing, does not allow a direct hit with a hammer, and not allowed to pass through the rolling pressure.

3, The use of appropriate, accurate installation tools To make use of a special tool, and tried to avoid using something like cloth and short fiber.

4,To prevent the corrosion of forklift bearings Handle forklift bearing directly to wash hands sweat, and coating quality mineral oil and then operate, with particular attention to anti-rust during the rainy season and summer.