64 products
Get Multiple Factory Quotes for Your Parts in 24 Hours
Connect with 800,000+ listed factories in Asia. Receive multiple quotes for your parts and manage production with speed and confidence.
Air Preparation Units with Filters, Regulators and Dryers
Pressure regulation accuracy of ±1-2% separates air preparation units that maintain consistent downstream performance from those that cause erratic actuator behaviour and costly pneumatic system shutdowns. When comparing suppliers below, prioritise those showing documented filter-regulator-dryer integration experience over shops listing individual components without assembly capability. Factory profiles show product range, company size, years in operation, and quality control capabilities - contact manufacturers directly to discuss specifications.
Each listing shows price ranges and product categories - but leak-tightness testing methods and material certifications only surface through direct contact or by including those requirements in your RFQ. If your system uses all three, many manufacturers offer complete assembly services to eliminate the coordination problems of managing multiple component suppliers.
Other related parts categories: Control Valves, Digital Pressure Switches, Vacuum Generators
Frequently Asked Questions
What Should I Include in My RFQ for Air Preparation Units?
Specify port size (G1/4, G3/8, G1/2), flow rate in Nl/min or Cv, filtration micron rating (5 micron standard, 0.3 micron for coalescing stages), auto-drain type, and whether you need filter, regulator, and lubricator as an integrated assembly or as separate components. State the ±1-2% regulation accuracy requirement explicitly - not every factory tests to that spec by default, and leaving it out invites quotes built to a looser standard.
How Do I Verify a Factory Can Hold ±1-2% Regulation Accuracy on Air Preparation Units?
Ask for the regulation accuracy test report showing output pressure deviation across the full rated flow range, along with the test bench setup used to record it. Request leak-tightness results at maximum rated pressure (held for at least 30 seconds with zero measurable drop) and material certificates for the housing (die-cast aluminum or polycarbonate bowl) and seal compounds (NBR or Viton).
Where Can I Source Air Preparation Units From Verified Chinese Manufacturers?
Start by browsing Haizol's Standard Parts directory for air preparation unit manufacturers already vetted before they're listed, then message a factory directly with your specs. That factory sets its own price, Haizol doesn't add anything on top of the quote. Most respond to a direct inquiry within 24 hours. Use that first exchange to discuss regulation accuracy and the housing and seal materials you need, since a factory confirms those details itself rather than something checked during listing. If you'd rather compare several quotes at once, a free account manager can submit the inquiry across multiple factories for you.
What Certifications Should I Request for Air Preparation Units Beyond ISO 9001?
Ask for ISO 8573-1 compliance data covering particulate, water, and oil content at the unit's outlet. For food-grade or pharmaceutical lines, request FDA-compliant seal materials and confirmation of lubricant-free operation. For CE-marked exports into the EU, confirm a Declaration of Conformity and whether the unit's pressure and volume combination falls under the Pressure Equipment Directive (PED).
What Are Realistic Lead Times for Air Preparation Units, and How Do I Avoid Assembly Delays?
Standard filter-regulator-dryer combinations typically ship in 3-5 weeks once specs are confirmed; fully custom manifold configurations or unusual port thread combinations can run 6-8 weeks. Lock down bowl material, drain type, and gauge units (bar vs. psi) before the factory starts tooling - changing these mid-production is the most common cause of schedule slippage on FRL assemblies.