Automotive Parts

Maintaining consistent inner diameter and split gap tolerance is critical for these stamped metal bushings to ensure proper snap-fit retention or shaft alignment. The open-ring structure allows for elastic deformation during assembly, requiring precise control over material springback and edge burrs to prevent interference with mating components.

Each unit features a cylindrical body with symmetrically positioned mounting holes and a longitudinal split, typical for cable clamps, sensor mounts, or mechanical spacers. The uniform wall thickness and clean cut edges indicate high-quality progressive die stamping, ensuring that hole positions remain concentric relative to the outer profile across high-volume production runs.

Suzhou Jiesheng Hardware utilizes ISO 9001 and IATF 16949 certified processes, leveraging multi-station progressive presses to achieve tight dimensional stability for such small-form factors. Surface treatments such as zinc plating or nickel plating can be applied to enhance corrosion resistance, while secondary operations like deburring and tumbling ensure smooth interfaces for sensitive electronic or automotive assemblies.

Quotation depends on material specification (e.g., stainless steel, carbon steel, or brass), annual volume, and specific surface finish requirements. Providing 2D drawings with defined tolerance bands for the ID, OD, and hole locations enables accurate tooling assessment and rapid prototyping support.